Blog / Flooring
Grandeur Flooring Review (2026)
An installer’s look at Grandeur: 214 products, white oak engineered hardwood and vinyl, Välinge 5G click, and what they cost installed in Toronto.
Quick answer
Where the numbers come from
Every figure below comes from the spec sheets of the 214 Grandeur products on our site as of September 2026. Where a sheet does not state something, we say so rather than fill the gap. We have not run our own wear tests and we do not give star ratings.
The range side by side
Välinge 5G is worth knowing by name
Eighteen sheets use Välinge 5G, a click system where the short end folds and locks down rather than being tapped together. On site it means fewer damaged board edges in a room full of cuts, and a tighter joint that is less likely to open up later as the floor moves seasonally.
It also means the floor floats, so installation is $3.20 per square foot rather than $4.90 for a nailed or glued board. Same product, different number, decided by which collection you pick.
White oak, and why it dominates
Sixty-two sheets are white oak, which is not an accident. White oak takes stain evenly, has a tighter grain than red oak, and is more dimensionally stable through a Toronto winter where humidity swings from 60% in August to 25% in January. It is the default for good reason.
Hickory, on 15 sheets, is the opposite choice: much harder, with dramatic colour variation board to board. People either love it or are startled by it once a whole floor is down. Ask to see several boards, not one sample.
What to check before you buy
Click or glue-down. Thirty sheets are glue-down, which is the more expensive installation.
Which wear layer, if you are looking at the vinyl. 28 mil is unusually good; 20 mil is the standard.
Species before colour. A hickory floor and a white oak floor in the same stain look quite different once laid.
What it costs installed
Floating laminate and click vinyl are from $3.20 per square foot, glue-down vinyl from $5.50 including glue, and engineered hardwood nailed or glued from $4.90 including glue and nails. Engineered that only clicks and floats is from $3.20. The flooring is priced separately and the full list is on our flooring installation cost page.
Browse the engineered hardwood and vinyl range ranges, or read our engineered versus solid comparison. Send us your square footage for a free quote.
To see how a specification sheet reads, open Grandeur Bridle Path from the Prestige Collection, Grandeur Azure Coast from the Regal Collection and Grandeur Versailles from the Noble Collection.
Buying Grandeur flooring in Toronto
We supply and install Grandeur across Toronto and the GTA, in engineered hardwood, vinyl and laminate. Our installers travel as far as Wasaga Beach, Niagara Falls and Castleton. Send the room size for a fixed written price, or have us out for the free in-home measure with samples in hand.
Frequently asked questions
What is Välinge 5G click?
A click system where the short end of the plank folds down and locks rather than being tapped along. It gives a tighter joint, damages fewer board edges during installation, and the floor floats – which makes it $3.20 per square foot to install rather than $4.90.
Is Grandeur hardwood or vinyl?
Both. Most collections are engineered hardwood, with rigid vinyl in others. The collection names do not tell you which, so check the product page or ask us.
Why is white oak used so much?
It takes stain evenly, has a tighter grain than red oak and holds its shape better through Toronto’s humidity swings. Sixty-two of the Grandeur sheets are white oak, which reflects the wider market rather than anything unusual about this brand.
What is the difference between hickory and oak?
Hickory is considerably harder and has dramatic colour variation from board to board. Oak is calmer and more predictable. Neither is better – but hickory surprises people once a whole floor is laid, so ask to see several boards rather than one sample.
Can Grandeur be refinished?
The engineered collections can where the veneer allows it, usually once or twice, and the sheets do not always state the veneer thickness. Ask us about the specific collection before counting on it. Vinyl cannot be refinished at all.
Keep reading