Blog / Flooring

Woden Flooring Review (2026)

By 22FLOORING installation team
Updated · 4 min read

An installer’s look at Woden Flooring: 98 products, 22 mil wear layers, 5Gi drop-lock click, and what they cost installed in Toronto.

Oatlight AB Lumine Collection by Woden Flooring, floor sample

Quick answer

Woden is a 98-product range at 22FLOORING spanning vinyl in 6, 7 and 9 inch widths and engineered hardwood with 3 mm and 4 mm top layers. The wear layers are unusually good – 22 mil on 16 sheets, above the 20 mil most brands treat as their best – and much of the range uses 5Gi drop-lock or 5G push-lock click systems. American oak leads the hardwood species. We have no customer reviews of Woden to show you, so this is an installer’s assessment built from the specification sheets. Installed by 22FLOORING, click flooring is from $3.20 per square foot and nailed or glued hardwood from $4.90 including glue and nails.

Where the numbers come from

Every figure below comes from the spec sheets of the 98 Woden products on our site as of September 2026. Where a sheet does not state something, we say so rather than fill the gap. We have not run our own wear tests and we do not give star ratings.

The range side by side

CollectionsVinyl 6, Vinyl 7 Diamond and Vinyl 9, plus the Grand Chateau and Vermont hardwood collections
Wear layer0.55 mm (22 mil) on 16 sheets, 0.5 mm (20 mil) on 12 and 0.3 mm (12 mil) on 10
Hardwood top layer4 mm AB grade on 7 sheets and 3 mm ABC grade on 6 – this is the wood veneer, not a vinyl film
SpeciesAmerican oak on 14 sheets and oak on 10
Installation5Gi drop-lock click on 21 sheets, 5G push-lock on 16 and 5G dry on 6
FinishEmbossed on 21 sheets
Widths7 inch on 21 sheets, with 6 and 9 inch options

A 4 mm veneer is worth paying attention to

Seven hardwood sheets list a 4 mm top layer and six list 3 mm. That is the actual wood above the core, and it is the number that decides whether your floor can be sanded and refinished – and how many times.

At 4 mm you can realistically refinish two or three times, which puts the floor in the same conversation as solid hardwood for longevity. At 3 mm, once or twice. Most engineered hardwood on the market sits at 2 mm or less. If you want a floor your children will still be walking on, this is where to look. See our engineered versus solid comparison.

AB grade and ABC grade

The sheets specify grade alongside the veneer thickness. Grading describes how much natural character the wood shows – knots, colour variation, mineral streaking. AB grade is cleaner and more uniform; ABC includes more character.

Neither is better made. It is entirely a question of whether you want a calm, even floor or one with visible personality. The mistake is choosing from a small sample, which cannot show you the spread across a whole room. Ask to see several boards.

What to check before you buy

22 mil versus 12 mil – both are in this range and the difference in a hallway is years.

Veneer thickness if you care about refinishing.

Grade, and see real boards rather than a sample chip.

What it costs installed

Floating laminate and click vinyl are from $3.20 per square foot, glue-down vinyl from $5.50 including glue, and engineered hardwood nailed or glued from $4.90 including glue and nails. We supply and install Woden across Toronto and the GTA. The flooring is priced separately and the full list is on our flooring installation cost page.

Browse all of Woden flooring, or just the Woden vinyl range. Send us your square footage for a free quote.

From three different collections: 903 Eternal Cosmos Vinyl 9, 711 Mount Harbor 7 Vinyl Diamond and 1108 Wheatfield.

Get a free quote

Buying Woden flooring in Toronto

We carry both halves of the Woden range, the vinyl and the engineered hardwood, and install them across Toronto and the GTA, with installers travelling as far as Wasaga Beach, Niagara Falls and Castleton. Woden is a Canadian brand based in Markham, so lead times on the common colours are usually short. Send your square footage for a free written quote, or book the free in-home measure and we will bring samples to your own light.

Frequently asked questions

What is 5Gi drop-lock?

A click system where the short end of the plank drops into place rather than being tapped along. Fewer damaged board edges during installation and a tighter joint. The floor floats, so installation is $3.20 per square foot rather than $5.50 for glue-down.

How thick is the Woden wear layer?

0.55 mm, which is 22 mil, on 16 sheets – better than the 20 mil most brands treat as their top grade. There is also 20 mil on 12 sheets and 12 mil on 10, so check the specific product.

What does 4 mm top layer mean?

It is the thickness of the real wood above the engineered core, and it decides how many times the floor can be sanded and refinished. At 4 mm, realistically two or three times. Most engineered hardwood sits at 2 mm or less.

What is the difference between AB and ABC grade?

How much natural character the wood shows. AB is cleaner and more uniform; ABC includes more knots and colour variation. Neither is better made – it is a look. Ask to see several boards, because a single sample cannot show the spread.

Is Woden vinyl waterproof?

The vinyl collections are built for wet areas. The engineered hardwood is not a waterproof floor. Woden makes both, so check which you are looking at.

Keep reading

Ready to get started?

Whether you’re just planning and budgeting, or are ready to start your next project. We’re here to help.

22FLOORING

Smiling installer in a grey 22 cap and polo, arms crossed

Thanks! Your request has been sent

We’ve received your project details and our team is already reviewing them. We’ll get back to you shortly.

We'll be in touch

Thank you for reaching out to us. One of our experts will be in touch within 24 hours with more information.