White Oak Tailor Master Artisan By Twelve Oaks
White Oak Tailor Master Artisan By Twelve Oaks
Get a Free Quote
Whether you’re just planning and budgeting, or are ready to start your next project. We’re here to help.
Product Specifications
From the Master Artisan collection, White Oak Tailor is a light natural white oak with a low colour variation, soft grey-beige tone and fine cathedral grain with small scattered knots. Each 3/4 inch board is 7-1/2 inches wide in random lengths up to 75 inches, built on a multi-layer ply core under a sawn-cut 3mm white oak veneer. It is hand stained and finished with seven aluminum oxide topcoats for a matte, oiled look, with micro V-bevelled edges. Tongue and groove profiles allow glue-down or nail-down installation below, on or above grade, so it works in basements as well as main floors. 22FLOORING supplies and installs White Oak Tailor across Toronto and the GTA, with engineered hardwood installation from $4.90 per square foot, including glue and nails.
Product Type: Engineered hardwood
Collection: Master Artisan
Colour: White Oak Tailor (Light Natural)
Product Code: ENG626
Dimensions: 3/4″ x 7-1/2″ x 75″ R.L.
Species: White Oak
Construction: Multi layer ply core, sawn cut 3mm solid wood veneer
Finish: Hand stained, 7 aluminum oxide topcoats, oil-finished matte look
Edge: Micro V-Beveled Edge
Locking System: Tongue and groove
Installation: Glue down, nail down
Installation Level: Below, on or above grade
Radiant Heat: Hydronic radiant heating, conditions apply
Relative Humidity: 35%-55%
Certification: FloorScore certified, CARB 93120 Phase 2 and EPA 40 C.F.R. 770 compliant
Warranty: 35-Year Residential Limited, 5-Year Light Commercial
Coverage per Box: 23.5 sq. ft.
Boxes per Pallet: 40
Coverage per Pallet: 940 sq. ft.
Box Weight: 55 lb.



























