Hardwood Refinishing Toronto
Refinishing brings a worn hardwood floor back to life without replacing a single board. We sand away years of scratches, pet marks and sun fading, then stain and seal it to the colour you want.
It costs a fraction of a new floor, keeps the wood you already paid for, and it is done in a few days. We refinish solid and engineered hardwood across Toronto and the GTA.
Our Approach
We start with an honest assessment. If your floor has enough wear layer left to sand, we say so. If it does not, we tell you that too, rather than selling you work that will not last.
From there we use dust-contained sanding equipment to keep your home liveable, apply your chosen stain, and finish with a hard-wearing sealant. Most homes are walkable again the next day.
We are licensed, insured to $2 million and WSIB compliant. Our workmanship is warranted for up to two years, and most of the floors we carry come with a manufacturer warranty of 20 to 40 years residential, 10 to 20 commercial.
What refinishing involves
Refinishing is quoted after a free in-home measure, because the price depends on the area, the condition of the boards and the finish you choose. We sand the floor back, stain it to the colour you want and seal it, and we only take the job on if there is enough wear layer left to sand.
Engineered floors with a thick veneer can be refinished as well as solid ones, and stairs can be refinished to match the floor they meet. See hardwood installation if the floor is past saving and needs replacing. Not sure which yours needs? See refinish or replace your hardwood, with the costs side by side.
Recent refinishing jobs
Real jobs, photographed by our team. See all our projects
Frequently asked questions
Can my hardwood floor be refinished, or does it need replacing?
It depends on how much wood is left above the tongue. Solid hardwood can usually take several sandings over its life. Engineered boards have a thin wear layer and often allow one sanding, sometimes none. We check what is left before recommending it, rather than after the machines are out.
What does refinishing actually involve?
We sand the floor back to bare wood, fill what needs filling, repair loose or squeaking boards, then stain and apply the finish coats. The boards you already own stay where they are, so you are paying for the work and the finish rather than for a new floor.
Can I change the colour of my floor?
Yes. Once the floor is sanded to bare wood it can be stained to a different colour and finished in the sheen you want, from matte through to gloss. This is the main reason people refinish a floor that is not actually worn out.
How long does refinishing take and can we stay in the house?
It is usually a few days, and the drying decides the schedule rather than the labour. Sanding and staining go quickly; the finish coats set the timeline and the room stays out of use between them. Sanding makes dust and the finish has a smell while it cures, so plan around the rooms being unavailable.
What does refinishing cost?
Hardwood refinishing is $6.50 per square foot, which covers sanding the floor back to bare wood, the repairs, the stain and the finish coats. The price is fixed in writing after a free in-home measure, with no hourly billing and nothing added on the day.
With hundreds of successful projects under our belt, you can trust us to deliver exceptional results for your space.
We take the time on subfloor preparation and fastening that makes that silence possible, because noise is the first sign of a rushed installation.
You get one point of contact from your first quote to the day we clean up and hand the room back to you.
We will tell you honestly which products manage both, and which ones only look the part.
What people are saying?
Ready to
get started?
Whether you’re just planning and budgeting, or are ready to start your next project. We’re here to help.
