Aaron Oak By Melange Floors

Aaron Oak is listed as Wave SPC flooring from Melange Floors. Each board is 7 inches wide and 48 inches long, micro-bevelled, 7.0 mm thick in total with 0.5 mm of that given over to the wear layer, on a core at 2,100 kg/m3. Stone-composite construction means the floor is waterproof and stays dimensionally steady, holding within 0.25 percent under EN 434. Sound reduction is given as 2 dB, and the sheet notes absorption and noise reduction, which helps in a condo or an upstairs hallway. Slip, stain and UV resistance are part of the surface treatment. Wear is covered 30 years in a house and 10 years in medium commercial use. 22FLOORING supplies and installs Aaron Oak across Toronto and the GTA. Send us your square footage for a free quote.

Product Type: SPC Flooring (Wave)
SPC Core Density: 2,100 kg/m³
Warranty: 30 years limited residential; 10 years limited medium commercial
Surface Treatment: Stain resistant, UV protection, skid resistance
Profile: Micro-Bevelled
Plank Size: 48″ × 7″
Total Thickness: 7.0 mm
Wear Layer Thickness: 0.5 mm
Heat Stability: Pass
Residual Indentation: Pass
Color Fastness: EN 20105-B02 ≥6 / ASTM F 1515 Pass
Dimensional Stability: EN 434 ≤0.25% / ASTM F 2199 Pass
Flexibility: EN 435 Method A Pass / ASTM F 137 Pass
Electrical Behavior: EN 1081 Method C Pass / ASTM F 150-06 Pass
STC/IIC / Sound Reduction: 2 dB / Waterproof, sound absorption, noise reduction Pass
Effect of 1 mm IXPE Padding: Pass
Castor Chair Resistance: EN 425 Pass / ASTM F1914 Pass
Chemical Resistance: Pass / ASTM F 925
Residual Indentation: ASTM F 970 Pass / EN 433 ≤0.1
Abrasion Group / Wear: ISO 4918:2016 After 25,000 cycles, no visible damage
Impact Resistance: EN 660-1/2 Pass
Slip Resistance: EN 13893 Class DS / ASTM D 2047-93 Pass / BS 7976-2 72/70 Pass
Thermal Resistance: EN 12664 Pass
Toxic Element Test: EN 71-3 Pass – No heavy metals, formaldehyde, or phthalates / ASTM F963-17 Pass
Fire Rating / Behaviour to Fire: EN 13501-1 Bfl-s1 / Smoke Density ASTM E 662 <450 / Makel Burner Test Pass / Group T
Size Tolerance / Squareness / Straightness: EN 427 48″×7″ / EN 428 7.0 mm / Squareness: 0.18 mm / Straightness: 0.07 mm
Other Characteristics: Pendulum Test: Low / Rz Surface Roughness: Moderate