Fuji 7mm Naf Classic By NAF Floors@Work

Fuji goes in as a floating floor with no nails, locking long sides with Unilin and short ends with a 5Gi drop lock, which keeps the install clean and makes a damaged board easier to deal with later. It is 7 mm rigid core vinyl with 1.5 mm of waffle EVA bonded underneath, so the underlay is already in place. The wear layer is 0.3 mm, or 12 mil, and the rating is AC5. Edges are micro-bevelled and the surface is deep textured. It suits any level of the home and works over hydronic radiant heat up to 26°C. 22FLOORING supplies and installs Fuji across Toronto and the GTA, with vinyl installation from $3.20 per square foot.

Structure: Rigid Core Vinyl w/ Underpad
Thickness: 7 mm / 0.27″
Length: 1524 mm / 60″
Width: 182 mm / 7.16″
Underpad: 1.5 mm Waffle EVA
Impact Sound Reduction (IIC): 73
Sound Transmission Class (STC): 72
Click Type: Long Side – Unilin / Short Side – 5Gi
Lock System: Drop Lock
Wear Layer: 0.3 mm / 12 mil
Edge Detail: Micro-bevel
Finish: Deep textured
Rating: AC5
Gloss Level: 5–6%
Installation: Floating (no nails)
Suitable Location: On, above, or below grade
Radiant Heat: Suitable for hydronic systems only (up to 26°C)
Extreme Temperature Performance: 55°F to 95°F / 12°C to 35°C
Certification: FloorScore Certified
Warranty: 30-year residential limited / 5-year commercial limited