Blog / Flooring

Anderson Tuftex Flooring Review (2026)

By 22FLOORING installation team
Updated · 7 min read

An installer’s look at Anderson Tuftex: 117 engineered hardwood floors in white oak, ash, hickory, pecan and walnut, with veneers from 1.2 mm to 6 mm.

Anderson Tuftex Willow Natural Timbers Smooth flooring shown installed in a bright room

Quick answer

Anderson Tuftex is a 117-floor range at 22FLOORING, and every one of them is engineered hardwood. The largest collections are Imperial Pecan, European Ash, Coast To Coast, Heritage Oak and Metallics II, with herringbone and parquet lines alongside the planks. Most sheets are white oak, with European ash, hickory, pecan and European walnut as well. What sets it apart is the spread: veneers run from 1.2 mm to 6 mm, most floors are rated above, on or below grade, and 53 sheets carry both Cradle to Cradle and GreenGuard Gold certification. It suits Toronto homes that want real wood in basements, condos and over in-floor heat. We have no customer reviews of Anderson Tuftex to show you, so this is an installer’s assessment built from the specification sheets. Installed by 22FLOORING, engineered hardwood is from $4.90 per square foot nailed or glued, including glue and nails. Herringbone and other patterns are quoted per job. Send us your square footage for a free quote.

Where the numbers come from

Every figure below comes from the spec sheets of the 117 Anderson Tuftex floors on our site as of November 2026. Where a sheet does not state something, we say so rather than fill the gap. We have not run our own wear tests and we do not give star ratings.

The range side by side

CollectionsImperial Pecan (9), European Ash (8), Coast To Coast (8), Heritage Oak (7), Metallics II (7) and many smaller lines
Floor typesEngineered hardwood on all 117 floor pages, including herringbone and parquet collections
SpeciesWhite oak on 48 sheets (17 more list White Oak), European Ash on 11, Hickory on 9, Pecan on 9, European walnut on 5
Wear layer1.2 mm to 6 mm veneer: 3 mm on 25 sheets, 4 mm on 17, 2 mm on 17, 1.2 mm on 14, 4.5 mm and 6 mm on 6 each
SizesThickness from 1/2 to 3/4; up to 3/4 x 10.25" x 23.62" – 86.61" on 6 sheets
InstallationNail, staple, glue or floating on 78 sheets, glue-down on 8; above, on or below grade on 90; radiant heat Yes on 81
Warranty50 Year Hardwood Limited Residential on 9 sheets, 50 year limited residential on 8; only 34 sheets state a warranty

Veneer thickness is the spec that varies most

The veneers on these sheets run from 1.2 mm to 6 mm. The most common is 3 mm, on 25 sheets, followed by 4 mm and 2 mm on 17 each, 1.2 mm on 14, and 4.5 mm and 6 mm on 6 each.

The veneer is the real wood on top of the core, and it decides whether the floor can ever be sanded back to bare wood. A 1.2 mm veneer, as on Noble Hall, is best treated as a floor you recoat rather than sand. At 4 mm and above there is enough wood for a full sanding and refinish later in the floor’s life, which matters in a busy family room with kids and a dog.

Wire-brushed is the most common surface (Wire-brushed on 39 sheets, Wirebrushed on 22), and the open texture helps hide the fine scratches pets leave. If you prefer a flat, clean board, 29 sheets list a Smooth texture.

Most of the range can go anywhere in a Toronto house

On the sheets, 90 list above, on or below grade, 78 allow nail, staple, glue or floating, and 81 answer Yes to radiant heat, with 7 more listed as Compatible.

Engineered construction is what makes this possible. The layered core moves far less than solid wood through Toronto’s dry winters and humid summers, so the boards can float or be glued over a basement slab or condo concrete, and sit over in-floor heat. Most condo boards also set rules for acoustic underlay, so check yours before choosing a method.

There are exceptions. Eight sheets are glue-down only, including herringbone such as Biscotti European Ash Herringbone, and 6 sheets allow nail, staple or glue but not floating. Thickness runs from 1/2 to 3/4, and a thicker board plus underlay raises the floor at doorways and stair nosings, so plan the transitions early.

Oil or aluminum oxide, and almost all of it low sheen

The most common finish is UV aluminum oxide at 7% gloss, on 43 sheets. Another 15 sheets use UV oil at 7% gloss, and other aluminum oxide sheets list 9% or 13% gloss.

Aluminum oxide is a hard, cured film on top of the wood that needs little more than cleaning, but a deep scratch in it cannot be touched up in place. UV oil sits in the wood instead; the Nocturne sheet notes it can be refreshed at home with cleaning and a new coat of oil. The trade is that an oiled floor wants that re-oiling from time to time.

Low gloss across the range is a practical choice. A matte surface shows less dust, fewer scuffs and less glare from big condo windows than a shiny one.

What to check before you buy

The veneer on your floor. Between 1.2 mm and 6 mm it decides whether the floor can ever be sanded and refinished.

Glue-down or floating. Some sheets, including herringbone, are glue-down only, which changes subfloor prep and what a condo board will approve.

The warranty for that floor. Only 34 of the 117 sheets state a warranty, so ask us for the terms on the specific design before you order.

What it costs installed

Engineered hardwood is from $4.90 per square foot nailed or glued, including glue and nails. Herringbone and other patterns are quoted per job. This is installation only; the floor itself, disposal, trim and levelling are priced on top, and the full list is on our flooring installation cost page. For how we install it, see our page on hardwood flooring installation in Toronto.

Browse Anderson Tuftex in our shop: engineered hardwood. Send us your square footage for a free quote.

Typical of the range: Nocturne Heritage Oak, Ballet European Ash Herringbone and Raw Umber Valencia Walnut.

Doing the stairs at the same time? See our staircase renovation in Toronto, about $7,000 a flight.

Get a free quote

Buying Anderson Tuftex flooring in Toronto

We carry Anderson Tuftex in engineered hardwood and install it across Toronto and the GTA. Our installers travel as far as Wasaga Beach, Niagara Falls and Castleton. Send your square footage for a free written quote, or book the free in-home measure and we will bring samples.

Every Anderson Tuftex floor we carry

All 117 Anderson Tuftex floors on our site, by collection. Tap a collection to see it as a group, or a colour to open that floor.

Engineered hardwood

Frequently asked questions

Can Anderson Tuftex go in a Toronto basement?

Most of the range can. On 90 sheets the installation level reads above, on or below grade, and 78 allow nail, staple, glue or floating, so the floor can float or be glued over a concrete slab. We check the slab for moisture and flatness when we measure.

Does Anderson Tuftex work over radiant heat?

On 81 sheets the answer is Yes, and 7 more say Compatible. Engineered boards cope with the warming and cooling of in-floor heat much better than solid wood. Not every sheet states it, so we confirm for the floor you pick.

Can an Anderson Tuftex floor be sanded and refinished?

It depends on the veneer, which runs from 1.2 mm to 6 mm. A 1.2 mm or 2 mm veneer should be treated as a floor that is recoated rather than sanded. Veneers of 4 mm and up leave enough wood for a full sanding later on.

What is the difference between the UV oil and aluminum oxide finishes?

Aluminum oxide is a hard cured film on the surface that needs little care but cannot be spot-repaired. UV oil, on 15 sheets at 7% gloss, sits in the wood and can be refreshed at home with cleaning and a new coat of oil. Oiled floors want that re-oiling from time to time.

What warranty comes with Anderson Tuftex?

Where a sheet states it, the warranty is 50 year limited residential, and a few sheets add a 5 year light commercial limited warranty. Only 34 of the 117 floors state a warranty at all. Ask us for the terms on the exact floor before you order.

Keep reading

Ready to get started?

Whether you’re just planning and budgeting, or are ready to start your next project. We’re here to help.

22FLOORING

Smiling installer in a grey 22 cap and polo, arms crossed

Thanks! Your request has been sent

We’ve received your project details and our team is already reviewing them. We’ll get back to you shortly.

We'll be in touch

Thank you for reaching out to us. One of our experts will be in touch within 24 hours with more information.

Shop by material

Engineered hardwoodSolid hardwoodVinylLaminateTileCarpet

Shop by room

BasementsCondosHomes with petsOver old tileHerringbone & chevronStairs

Brands we recommend

Recent jobs

Floor installation

HardwoodEngineered hardwoodHerringbone & chevronVinylLaminateTile

Stairs & renovation

Staircase renovationStair repair & refinishingGlass railingsHardwood refinishingWainscoting

Areas we serve

TorontoNorth YorkMississaugaBramptonMarkhamRichmond HillWoodbridge & VaughanBarrie

Plus all surrounding areas, as far as Niagara Falls, London and Wasaga Beach.