Walnut Brown White Oak Wire Brushed

Walnut Brown is a white oak board with a wire brushed texture, part of the Riverside Heights range. Under its 2 mm wood wear layer sits a multi-ply tongue and groove core, the construction that lets an engineered floor go over a concrete slab or basement subfloor. Three fixing options are listed: floating, glue down and nail down, to suit the subfloor. Each plank is 1/2 inch thick and 4 3/4 inches wide, micro bevelled on four sides and finished matte at 10% aluminum oxide gloss. Aim to keep relative humidity between 30% and 65% once the floor is in. Coverage works out to 28.37 sq. ft. per box and 1361.76 sq. ft. per pallet. 22FLOORING supplies and installs Walnut Brown across Toronto and the GTA, with engineered hardwood installation from $4.90 per square foot, including glue and nails.

Construction: Engineered Wood
Dimensions: 1/2″ × 4 3/4″
Core: Multi-ply tongue & groove
SKU: 714-19

Wear Layer: 2 mm
Surface Finish: Matte with 10% aluminum oxide gloss
Edge Treatment: Micro-beveled (4 sides)

Installation Methods: Floating, Glue Down, Nail Down
Installation Level: All levels
Environmental Requirements: Relative Humidity 30%–65%

Package:
28.37 sq. ft./box
48 boxes/pallet
1361.76 sq. ft./pallet