Blog / Flooring
Appalachian Flooring Review (2026)
An installer’s look at Appalachian: 120 hardwood floors, most offered both solid and engineered, across Signature, Alta Moda, Green Mountain, Verità and Heritage.

Quick answer
- Where the numbers come from
- The range side by side
- One colour, two ways to build it
- Narrow solid strips, wider engineered planks
- Grade and sheen change the look more than the colour name
- What to check before you buy
- What it costs installed
- Buying Appalachian flooring in Toronto
- Every Appalachian floor we carry
- Frequently asked questions
Where the numbers come from
Every figure below comes from the spec sheets of the 120 Appalachian floors on our site as of November 2026. Where a sheet does not state something, we say so rather than fill the gap. We have not run our own wear tests and we do not give star ratings.
The range side by side
One colour, two ways to build it
Of the 120 Appalachian designs on our site, 83 are sold both as solid and as engineered hardwood. For us this is the most useful thing about the range. You choose the colour first, then the construction that suits each room.
Solid hardwood is wood all the way through. It is nailed to a wood subfloor and can be sanded and refinished many times over its life. It belongs on or above grade: living rooms, dining rooms, bedrooms and upstairs halls. It does not belong on a basement slab, where moisture comes up through the concrete.
Engineered hardwood has a layered build that stays steadier through Toronto’s dry winters and humid summers. That makes it the usual choice for basements, concrete slabs and condos, and the safer one over in-floor heat. The sheets we hold do not state installation methods or radiant heat approval, so we check the manufacturer’s current documents before we quote.
Narrow solid strips, wider engineered planks
The solid boards are ¾″ thick in 2 ¼″, 3 ¼″ and 4 ¼″ widths. That is a traditional strip floor, and the narrow widths sit comfortably in older Toronto houses with original oak in the hallway.
If you want a wider plank, the engineered side is where to look. Sheets such as Canvas White Oak and Orzo White Oak list engineered boards up to 7″ wide, in 11.4mm or 18.4mm thicknesses. Wide boards are usually engineered because a wide solid board moves more as the humidity changes.
Thickness matters at doorways and on stairs. A ¾″ solid floor and an 11.4mm engineered floor finish at different heights against tile or an existing floor. If you mix constructions between rooms, plan the transitions and the stair nosings before the order goes in.
Grade and sheen change the look more than the colour name
Excel appears on every Appalachian sheet that names a grade. Many designs are also offered in Advantage, Live Sawn Character and Prestige, and 24 solid and 24 engineered sheets list all four. In general, grade sorts boards by how many knots and how much colour variation they carry. The same stain can look calm in one grade and busy in another.
Sheen is the other choice. Some sheets offer semi-gloss or ultra-matte, others a flat gloss, and some floors are wire-brushed. With kids or dogs, a low sheen and a brushed surface hide fine scratches better than a smooth semi-gloss. Only 19 of the solid sheets state a finish and texture, so confirm both on the sample you approve.
What to check before you buy
Solid or engineered. Most designs come both ways on one page, so make sure the order and the quote name the construction, thickness and width for each room.
The grade on the order. The same colour is sold in up to four grades, and the grade decides how many knots and colour shifts you will see.
Warranty and installation terms. The sheets we hold do not state a warranty or installation methods, so get both from the manufacturer’s current documents before you buy.
What it costs installed
Engineered hardwood is from $4.90 per square foot nailed or glued, including glue and nails, and solid hardwood from $4.50. This is installation only; the floor itself, disposal, trim and levelling are priced on top, and the full list is on our flooring installation cost page. For how we install it, see our page on hardwood installation.
Browse Appalachian in our shop: solid hardwood and engineered hardwood. Send us your square footage for a free quote.
Typical of the range: Modal Birch, Orzo White Oak and Virtuoso White Oak.
Doing the stairs at the same time? See our staircase renovation in Toronto, about $7,000 a flight.
Buying Appalachian flooring in Toronto
We carry Appalachian in solid and engineered hardwood and install it across Toronto and the GTA. Our installers travel as far as Wasaga Beach, Niagara Falls and Castleton. Send your square footage for a free written quote, or book the free in-home measure and we will bring samples.
Every Appalachian floor we carry
All 120 Appalachian floors on our site, by collection. Most designs come in both solid and engineered, so they appear under both. Open a floor type, then tap a collection to see it as a group or a colour to open that floor.
Engineered hardwood 99 floors
Solid hardwood 120 floors
Frequently asked questions
Is Appalachian flooring solid or engineered hardwood?
Both. Of the 120 floors on our site, 117 come in solid and 86 in engineered, and 83 designs are sold both ways on the same page. The Heritage collection is solid only.
Can I put Appalachian hardwood in a basement or a condo?
Use the engineered version, not the solid. Solid hardwood is for on- or above-grade rooms over a wood subfloor, while engineered is steadier with humidity and is the usual choice over concrete and in condos. The sheets we hold do not state installation methods or acoustic ratings, so we confirm those against your condo board’s rules and the manufacturer’s documents.
What sizes does Appalachian come in?
Solid boards are ¾″ thick in 2 ¼″, 3 ¼″ and 4 ¼″ widths. Engineered boards are 11.4mm (½″) or 18.4mm (¾″) thick in widths from 4″ to 7″, depending on the design. Not every design comes in every size, so check the floor’s own page.
Which wood species does Appalachian offer?
Red oak, white oak, hard maple, birch and hickory. Red oak is the largest group, with 44 solid and 33 engineered floors, and white oak follows with 30 solid and 31 engineered. Birch is offered in solid only.
What do the Appalachian grades mean?
The grades are Advantage, Excel, Live Sawn Character and Prestige, and Excel appears on every sheet that names a grade. Grade sorts boards by how many knots and how much colour variation they carry. Ask to see a sample in the exact grade you are ordering.
Keep reading

























